Nylon 6 is a tough, abrasion and lightweight material. It has improved surface appreance, creep resistance, and processability compared to nylon 66. It is suitable to mold into bearing or tools need good impact strength. The toughness of PA6 is better than POM, but its stiff and tough can not compete with PC(polycarbonate). Nylon 6 is easy to absorb moisture, when moisture content rised it significant increase occur in impact strength and general enery absorbing characteristics. For glass fiber reinforced grade, it can be used high temperature up to 220℃, so it can be good candidate of industrial tools.
PA66
Nylon 66 allows it to be used in almost any application that required high physical strength, ductility, heat resistance and chemical resistance. Therefore, Nylon 66 is one of the most versatile engineering thermoplastics. It is also an outstanding candidate for metal replacement applications. The use of internal lubricants in Nylon 66 significant improves on the already excellent wear resistance and friction properties. Thus it is to be used widely in industrial parts needing wear resistance.
PA12
Nylon 12 has an outstanding chemical resistance, excellent durability as well as wide range of flexibility. It is widely used in automobile field such as hose, tube, connector holder and fuel parts. Due to its low water absorbing, dimension stability and wear resistance, it is also use as industrial parts needing high performance.
PA46
PA46 is able to applied to following fields. Automotive parts such as transmission components, timing system, gear, lamp fittings and electrical parts. And electrics parts such as connector and PCB mounted components, industrial items such as parts required resisting heat, vibrations and impact. Motor parts such as oil pump gear, balancer gear, sprockets, CVT – friction roller and spacer and timing parts and so on.
Grade
- Glass Fiber Reinforced
- Glass Bead Reinforced
- Mineral Reinforced
- Impact Modified/Toughness
- Wear Resistance. Low Friction
- Anti-Static, Conductive
- Weather Resistance
- Custom-Made
| Description | Grade | Characteristics | Application |
| Glass Fiber Reinforced | M1200GF | 20% Glass Fiber, high strength | Car & motor, hand-held tools, mechanical tools |
| M1330GF | 33% Glass Fiber, high strength | ||
| M1430GF | 43% Glass Fiber, high strength | Parts required high stiffness & low shrinkage | |
| M1500GF | 50% Glass Fiber, high strength | ||
| Glass Fiber Reinforced Impact | M1200FGT | 20% Glass Fiber, impact modified | Parts required impact & strength |
| M1300GFT | 30%Glass Fiber impact modified | ||
| Low Warpage | M1300GB | 30% Glass Beads low warp, anti-scratch | Parts required smooth surface & low warp |
| M1300TC | 30% Mineral filled, low warp, good surface | ||
| Carbon Fiber Reinforced | M1100CF | 10% Carbon Fiber | Parts required high strength, wear resistance |
| M1200CF | 20% Carbon Fiber, high strength/stiffness | ||
| Nano Composites | M1300GBS | Glass Beads filled, low warp, high stiffness | Parts required good surface, low warp |
| Description | Grade | Characteristics | Application |
| Glass Fiber Reinforced | M2300GF | 33% Glass Fiber, high strength | Gear, parts of vehicle, pneumatic tools, mechanical parts |
| M2430AGF | 43% Glass Fiber, high strength/stiffness, stable dimension | ||
| M2500AGF | 50% Glass Fiber, high strength/stiffness, stable dimension | ||
| Glass Fiber Reinforce Impact | M2300AGF | 30% Glass Fiber, high strength/stiffness, impact modified | Pneumatic tools, parts required high strength and impact |
| Carbon Fiber Reinforced | M2200CF | 20% Carbon Fiber, high stiff, wear resistance | Parts required high stiffness, high strength and wear resistance |
| M2158GCF | Glass beads/Carbon Fiber, High stiffness, wear resistance | ||
| Wear Resistance | M2182TFS | 18% PTFE, 2% Silicon, wear resistance | Parts required high slide and low friction |
| M2300TF | 30% Glass Fiber/15% PTFE, high strength, wear resistance | Parts required high stiffness, high strength and wear resistance | |
| M2300TFS | 30% Glass Fiber/15% PTFE/1%Silicone, high strength, wear resistance | ||
| M2150TF8 | 15% Glass Fiber/8% PTFE, high strength, wear resistance | Roll pillar motorcycle, parts required high stiffness and wear resistance | |
| M2150 | 15% Glass Beads/15%PTFE, wear resistance | ||
| Wear Resistance | M2315 | 30% Glass bead / 15%PTFE, wear resistance | Roll pillar of motorcycle, parts required high stiff and wear resistance |
| M2320 | 30% Glass bead / 20%PTFE, wear resistance | ||
| M2115AF | 10% Aramid Fiber / 15% PTFE, wear resistance | Pneumatic tools, parts required high slide & low friction | |
| M2200ms | 2.5% Molybdenum Disulfide filled, wear resistance | Motorcycle and bike, required sliding parts with metal friction | |
| M2330GMS | 33% Glass Fiber / 2.5% MoS2, high strength/stiffness, wear resistance | ||
| Low Wrapage | M2300GB | 30% Glass Beads, low warp, anti-scratch | Parts required smooth surface & low warp |
| Description | Grade | Characteristics | Application |
| Glass Fiber Reinforced | M3300GF | 30% Glass Fiber, high stiffness | Parts required wear resistance, low noise and dimension stable |
| M3315TF | 30% Glass Fiber / 15%PTFE, high stiffness, wear resistance | ||
| M3225AF | Glass Fiber/PTFE/Aramid Fiber wear resistance | ||
| Carbon Fiber Reinforced | M3200CF | 20% Carbon Fiber, high stiffness, wear resistance | Parts required wear resistance, low noise |
| Low wrapage | M3300MA | 30% Mica, wear resistance, low warp | Parts required wear resistance, low noise |
| Description | Grade | Characteristics | Application |
| Wear Resistance | M4015TF | 15% PTFE, wear resistance | Parts required high temperature and high stiffness/strength |
| M4182TFS | 18% PTFE/2% Silicon, wear resistance | ||
| M4115CTF | Carbon fiber/PTFE, High stiffness, wear resistance | ||
| M4315TF | 30% Glass Fiber/15% PTFE, high stiffness, wear resistance | ||
| M4715AF | Aramid Fiber/PTFE, wear resistance |